Wenglor | OLEB122C0102

OLEB122C0102 Light Curtain Pick-to-Light

Light Curtain

In Stock
$626.00 per unit

Applications: Sensors & I/O

Description

Pick to light light curtains use the single-lens reflex principle. The necessary reflector is pre-installed on the rear of the housing and serves as a reflective surface for the neighboring light curtain, making installation easier. The integrated two-color light from the job display is visible from 360° and shows both correct and incorrect picks.

Features at a Glance

  • Error prevention during partial picking processes in shelves and storage locations
  • Low mounting thanks to integrated reflector
  • Rugged aluminium housing
  • 360° visible, two-color job display

Technical Data

Optical Data

Range 2,000 mm
Min. Distance to Reflector 100 mm
Measurement Field Height (MFH) 120 mm
Beam Distance 30 mm
Switching Hysteresis  < 15 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Opening Angle 2.5 °
Two-Lens Optic yes

Electrical Data

Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 120 Hz
Response Time 4 ms
Temperature Drift < 10 %
Temperature Range -25 … 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Mechanical Data

Setting Method Teach-In
Display Illuminated cap
Housing Material Aluminum, powder-coated
Plastic, PC
Optic Cover Plastic, PMMA
Degree of Protection IP65
Connection M12 × 1; 4-pin
Cable length (L) 250 mm
Housing Length (L) 246 mm
Reflector Length (RL) 162 mm
Weight 138 g

General Data

Scope of delivery 1 × initial start-up instructions
1 × sensor

Output

PNP NO yes

Adjustable parameters

Circuit NC
NC/NO
NO
All other parameters can be found in the product documentation.

Standards and certificates

Connection Diagram

Ctrl. Panel

06 = Teach Button
68 = Power LED
01 = Switching Status Indicator

Complementary Products

  • Reflector ZRDE12B01
  • Reflector Foil ZRDF10K01
  • PNP-NPN Converter BG2V1P-N-2M

Documentation

CAD data

Datasheets

Declarations of Conformity / Approvals

ECAD data

Initial start-up instructions

Operating instructions