Wenglor | KR87PCT2S899

KR87PCT2S899 Retro-Reflex Sensor for Transparent Objects

Retro-Reflex Sensor

In Stock
$386.00 per unit

Applications: Sensors & I/O

Description

A reflector must be used in combination with these sensors. wenglor has the right retro-reflex light barrier for every application. Even crystal-clear objects and sheet products can be reliably recognized. The sensor is easy to install with its integrated M18 threaded fixation, and can be easily protected as well. Time delay can be activated by RS-232 interface.

Features at a Glance

  • Recognition of clear glass
  • Simple installation
  • Teach-in, external teach-in

Technical Data

Optical Data

Range 4,000 mm
Reference Reflector/Reflector Foil RQ100BA
Clear Glass Recognition yes
Switching Hysteresis  < 5 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Opening Angle 5 °
Single-Lens Optic yes

Electrical Data

Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 2 kHz
Response Time 250 µs
On-/Off-Delay (RS-232) 0 … 5 s
Temperature Drift < 5 %
Temperature Range -10 … 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Teach Mode NT, MT
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, PBT
Stainless steel, V2A (1.4305 / 303)
Full Encapsulation yes
Degree of Protection IP69K
Connection M12 × 1; 4-pin
Weight 29 g

General Data

Scope of delivery 1 × initial start-up instructions
1 × MUTTER-M18-E012 hex nut
1 × sensor

Output

PNP NC yes
External teach-in input yes
RS-232 with Adapterbox yes

Adjustable parameters

Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay
All other parameters can be found in the product documentation.

Standards and certificates

Connection Diagram

Ctrl. Panel

06 = Teach Button
30 = Switching Status/Contamination Warning

Reflector data

RQ100BA 0 … 4 m
RE18040BA 0 … 3 m
RQ84BA 0 … 4 m
RR84BA 0 … 4 m
RE9538BA 0 … 1.5 m
RE6151BM 0 … 3.6 m
RR50_A 0 … 3 m
RE6040BA 0 … 3.5 m
RE8222BA 0 … 2 m
RR34_M 0 … 1.8 m
RE3220BM 0 … 1.8 m
RE6210BM 0 … 1.2 m
RR25_M 0 … 1.4 m
RR25KP 0 … 1 m
RR21_M 0 … 1 m
ZRAE02B01 0 … 2 m
ZRME01B01 0 … 0.6 m
ZRME03B01 0 … 2.8 m
ZRMR02K01 0 … 0.8 m
ZRMS02_01 0 … 0.9 m
RF505 0 … 1.2 m
RF508 0 … 1.1 m
RF258 0 … 1 m
ZRDF__K01 0 … 4 m

Complementary Products

  • Reflector, Reflector Foil
  • Adapterbox A232
  • Dust Extraction Tube STAUBTUBUS-01
  • PNP-NPN Converter BG2V1P-N-2M

Documentation

CAD data

Datasheets

Declarations of Conformity / Approvals

ECAD data

Initial start-up instructions

Interface protocol

Operating instructions