UF55MG3 Fiber-optic amplifier
Fiber-Optic Amplifier
In Stock
$469.00
per unit
Applications: Sensors & I/O
Description
This sensor is suitable for analog distance measurements and can be used with or without a glass fiber cable. The output voltage is dependent upon the brightness of the object to be measured, as bright objects reflect transmitted light better than dark objects.
Features at a Glance
- Linear output signal proportional to distance
- Usable with or without glass fiber-optic cable
- Analog output (0…10 V DC)
Technical Data
Optical Data
| Functional principle | Reflex mode |
| Working Range | 50 … 500 mm |
| Measuring Range | 450 mm |
| Resolution | 10 mm |
| Linearity | 5 % |
| Light Source | Infrared Light |
| Wavelength | 880 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 12 ° |
Electrical Data
| Supply Voltage | 20 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 50 Hz |
| Response Time | 10 ms |
| Temperature Drift | 1 mm/K |
| Temperature Range | -10 … 60 °C |
| Analog Output | 0…10 V |
| Output Resistance Analog Output | 1 kOhm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Brass, nickel-plated |
| Optic Cover | Glass |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 4-pin |
| Weight | 139 g |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × sensor 1 × UEM30KU-01 sleeve nut 2 × MUTTER-M30-E001 hex nuts |
Output
| Analog Output | yes |
Standards and certificates
     |
Connection Diagram
 |
Ctrl. Panel
|
16 = Working Distance Adjustment
12 = Analog Output Indicator |
Complementary Products
|
