P18L001 Retro-Reflex Sensor Universal
Retro-Reflex Sensor
In Stock
$199.00
per unit
Applications: Sensors & I/O
Description
The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Features at a Glance
- Stainless steel housing
- Condition monitoring
- IO-Link 1.1
- Adjustable switching distance
- Red light
Technical Data
Optical Data
| Range | 6,000 mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 15 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Two-Lens Optic | yes |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 1,000 Hz |
| Switching frequency (speed mode) | 1,500 Hz |
| Response Time | 0.5 ms |
| Response time (speed mode) | 0.35 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -10 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| PNP Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Stainless steel, V2A (1.4305 / 303) Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 39 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 3,126.88 a |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × MUTTER-M18-E003 hex nut 1 × sensor |
Output
| IO-Link | yes |
| PNP NO | yes |
Adjustable parameters
| Output | Push-pull NPN PNP |
| Circuit | inactive Error output NC NC+NO NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates
      |
Connection Diagram
 |
Ctrl. Panel
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Reflector data
| RQ100BA | 0.02 … 6 m |
| RE18040BA | 0.02 … 3.3 m |
| RQ84BA | 0.01 … 4.5 m |
| RR84BA | 0.02 … 4.5 m |
| RE9538BA | 0.02 … 1.5 m |
| RE6151BM | 0.01 … 4.5 m |
| RE6151BA | 0.02 … 2.3 m |
| RR50_A | 0.02 … 4 m |
| RE6040BA | 0.02 … 4 m |
| RE8222BA | 0.01 … 2 m |
| RR34_M | 0.01 … 2.4 m |
| RE3220BM | 0.01 … 1.6 m |
| RE6210BM | 0.01 … 1.6 m |
| RR25_M | 0.02 … 1.6 m |
| RR25KP | 0.02 … 1.4 m |
| RR21_M | 0.01 … 1.6 m |
| ZRAE02B01 | 0.02 … 3 m |
| ZRME01B01 | 0.02 … 1 m |
| ZRME03B01 | 0.02 … 2.8 m |
| ZRMR02K01 | 0.02 … 1.1 m |
| ZRMS02_01 | 0.01 … 1.5 m |
| RF505 | 0.06 … 1.6 m |
| RF255 | 0.06 … 1.2 m |
| RF508 | 0.06 … 1.6 m |
| RF258 | 0.06 … 1.2 m |
| ZRDF__K01 | 0.06 … 4 m |
Complementary Products
|
