Description
This switch allows simple connecting of up to four Industrial Ethernet products. Two PoE-capable ports supply connected devices with the needed power. In addition, up to four PNP sensors and actuators can be connected via two digital I/O ports.
Features at a Glance
- 2 digital I/O ports
- 4 Industrial Ethernet ports
- 2 PoE-capable ports
- High protection class IP67
- Rugged aluminium housing
Technical Data
Electrical Data
| Supply Voltage | 18 … 32 V |
| Power consumption of device max. | 0.25 A |
| Power consumption of system max. | 2 A |
| Max. PoE Capacity | 25 W |
| Max. Switching Current Switching Outputs | 0.6 A |
| max. total current of the digital I/O ports | 1 A |
| Switching Output Voltage Drop | < 2.5 V |
| Temperature Range | -25 … 60 °C |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Reverse Polarity Protection | yes |
| PoE Ports | 2 |
| Number of digital I/O ports | 2 |
| Supported PoE Standard | IEEE802.3af, IEEE802.at |
| Supported PoE Classes | Class 0, 1, 2, 3 |
| Transmission rate | 10/100 Mbit/s |
| Transmission Mode | Full/Half Duplex |
| Managed Switch | yes |
| Switch Mode | Store & Forward |
| VLAN Prioritization | yes |
| Auto-Crossover | yes |
| Auto-Negotiating | yes |
| Auto-Polarity | yes |
| Interface | PROFINET |
| Protection Class | III |
Mechanical Data
| Setting Method | Web server |
| Material | Aluminum |
| Degree of Protection | IP67 |
| Type of Connection Power | 2 × 7/8″, 5-pin |
| Type of Connection Industrial Ethernet Ports | 2 × M12; 4-pin |
| Type of Connection PoE Ports | 2 × M12; 8-pin |
| Type of connection digital I/O ports | 2 × M12; 4-pin |
| Weight | 1,130 g |
General Data
| Scope of delivery | 1 × BEF-SET-40 mounting set 1 × initial start-up instructions 1 × switch 1 × thermal transfer printing adhesive label 1 × thermal transfer printing adhesive label, white |
Output
| PROFINET-I/O, CC-B | yes |
| Power Source Equipment for PoE | yes |
Standards and certificates
     |
Connection Table
 |
Complementary Products
|
