P2KE007 Through-Beam Sensor
Through-Beam Sensor
Applications: Sensors & I/O
Description
The through-beam sensor works with a fine laser beam as well as an emitter and receiver. The collimated class 1 laser beam detects objects, e.g., when conducting installation, feed, or presence checks, starting from a size of 1.0 mm, over the entire range. The emitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as to read out switching statuses and signal values. The robust 316L stainless steel housing (1.4404/V4A) is resistant to oils, coolants, and cleaning agents.
Features at a Glance
- IO-Link 1.1
- Very high switching frequency
- Test input for high operational reliability
- Robust stainless steel housing with IP69K
- Detect extremely small parts starting at 1 mm
Technical Data
Optical Data
| Range | 10,000 mm |
| Smallest Recognizable Part | see Table 1 |
| Switching Hysteresis | < 10 % |
| Light Source | Laser (red) |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
Electrical Data
| Sensor Type | Receiver |
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 4,500 Hz |
| Switching Frequency (interference-free mode) | 2,000 Hz |
| Response Time | 0.11 ms |
| Response time (interference-free mode) | 0.25 ms |
| Temperature Drift (-10 °C < Tu < 40 °C) | 10 % * |
| Temperature Range | -40 … 50 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Stainless steel, V4A (1.4404 / 316L) |
| Degree of Protection | IP68 IP69K |
| Connection | M8 × 1; 3-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 42 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 1,913.81 a |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × sensor |
| Approvals | Ecolab |
Output
| PNP NC | yes |
| IO-Link | yes |
Adjustable parameters
| Output | Push-pull NPN PNP |
| All other parameters can be found in the product documentation. |
Standards and certificates
       |
Table 1
| Distance transmitter/receiver | 1 m | 6 m | 10 m |
| Smallest Recognizable Part | 2,5 mm | 1,0 mm | 1,5 mm |
Connection Diagram
 |
Ctrl. Panel
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Complementary Products
|
