P1RK003 Retro-Reflex Sensor for Transparent Objects
Retro-Reflex Sensor
Applications: Sensors & I/O
Description
The retro-reflex sensor for transparent objects, such as clear glass, works with red light and a reflector. It has a IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensor settings (PNP/NPN, NC/NO, switching threshold, error output) as well as for reading out switching statuses and signal values. The dynamic readjustment of the switching threshold function automatically adjusts this for contamination, aging, or temperature deviations, meaning that these factors have almost no effect on functionality.
Features at a Glance
- Dynamic readjustment of the switching threshold
- High-end
- IO-Link 1.1
- Special for glass, PET and films
- Teach-in, external teach-in
Technical Data
Optical Data
| Range | 4,000 mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Clear Glass Recognition | yes |
| Smallest Recognizable Part | see Table 2 |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
| Single-Lens Optic | yes |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 1,000 Hz |
| Switching frequency (speed mode) | 2,000 Hz |
| Response Time | 0.5 ms |
| Response time (speed mode) | 0.25 ms |
| Temperature Drift | < 5 % |
| Temperature Range | -40 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| NPN Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Teach Mode | NT, MT |
| Interface | IO-Link V1.1 |
| Data Storage | yes |
| Protection Class | III |
Mechanical Data
| Setting Method | Teach-In |
| Housing Material | Plastic, PBT Brass, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP67 IP68 |
| Connection | M12 × 1; 4-pin |
| Weight | 31 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 1,995.65 a |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × MUTTER-M18-E012 hex nut 1 × sensor |
Output
| IO-Link | yes |
| NPN NC | yes |
| External teach-in input | yes |
Adjustable parameters
| Output | Push-pull NPN PNP |
| Circuit | Error output NC NC+NO NO |
| Other parameters | Off-delay On-delay Mode of operation Dynamic readjustment Hysteresis Switching point Emitted light Teach-in mode |
| All other parameters can be found in the product documentation. |
Standards and certificates
      |
Table 1
| Working Distance | 0,5 m | 2 m | 4 m |
| Light Spot Diameter | 20 mm | 50 mm | 90 mm |
Table 2
| Distance, Sensor to Reflector | 0,5 m | 2 m | 4 m |
| Smallest Recognizable Part | 1 mm | 5 mm | 10 mm |
Connection Diagram
 |
Ctrl. Panel
|
30 = Switching Status/Contamination Warning
06 = Teach Button 68 = Power LED |
Reflector data
| RQ100BA | 0 … 4 m |
| RE18040BA | 0 … 3.5 m |
| RQ84BA | 0 … 4 m |
| RR84BA | 0 … 4 m |
| RE9538BA | 0 … 1.5 m |
| RE6151BM | 0 … 4 m |
| RR50_A | 0 … 4 m |
| RE6040BA | 0 … 3.5 m |
| RE8222BA | 0 … 3 m |
| RE3220BM | 0 … 1.5 m |
| RE6210BM | 0 … 1.5 m |
| RR25_M | 0 … 1.5 m |
| RR25KP | 0 … 0.7 m |
| RR21_M | 0 … 1 m |
| ZRAE02B01 | 0 … 1 m |
| ZRME01B01 | 0 … 0.6 m |
| ZRME03B01 | 0 … 2 m |
| ZRMR02K01 | 0 … 1 m |
| ZRMS02_01 | 0 … 1 m |
| RF505 | 0 … 1 m |
| RF508 | 0 … 1 m |
| RF258 | 0 … 1 m |
Complementary Products
|
