P1NK206 Retro-Reflex Sensor for Transparent Objects
Retro-Reflex Sensor
In Stock
$294.00
per unit
Applications: Sensors & I/O
Description
The retro-reflex sensor for transparent objects works with red light and a reflector. Where conventional retro-reflex light barriers reach their limits, this retro-reflective barrier for clear glass recognition ensures that extremely shiny objects like glass, PET bottles, trays or film can be detected. Via the single-lens optic without blind spots, the sensor can detect objects even through small holes and gaps. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Features at a Glance
- Condition monitoring
- IO-Link 1.1
- No blind spot from single-lens optics
- Special for glass, PET and films
Technical Data
Optical Data
| Range | 2,600 mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Clear Glass Recognition | yes |
| Smallest Recognizable Part | see Table 2 |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Single-Lens Optic | yes |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 2,000 Hz |
| Switching frequency (speed mode) | 3,500 Hz |
| Response Time | 0.25 ms |
| Response time (speed mode) | 0.14 ms |
| Temperature Drift | < 3 % |
| Temperature Range | -40 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67 IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 30 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 2,690.44 a |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × sensor |
Output
| IO-Link | yes |
| NPN NC, NPN NO | yes |
Adjustable parameters
| Output | Push-pull NPN Contamination Output |
| Circuit | NC NO NC/NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates
      |
Table 1
| Working Distance | 0,5 m | 1,3 m | 2,6 m |
| Light Spot Diameter | 30 mm | 45 mm | 80 mm |
Table 2
| Distance, Sensor to Reflector | 0,5 m | 1,3 m | 2,6 m |
| Smallest Recognizable Part | 1,5 mm | 4 mm | 15 mm |
Connection Diagram
 |
Ctrl. Panel
|
30 = Switching Status/Contamination Warning
05 = Switching Distance Adjuster 68 = Power LED |
Reflector data
| RQ100BA | 0 … 2.6 m |
| RE18040BA | 0 … 1.5 m |
| RQ84BA | 0 … 1.8 m |
| RR84BA | 0 … 2.2 m |
| RE9538BA | 0 … 0.85 m |
| RE6151BM | 0 … 2 m |
| RR50_A | 0 … 1.55 m |
| RE6040BA | 0 … 1.8 m |
| RE8222BA | 0 … 1.1 m |
| RR34_M | 0 … 1.2 m |
| RE3220BM | 0 … 0.9 m |
| RE6210BM | 0 … 0.5 m |
| RR25_M | 0 … 0.65 m |
| RR25KP | 0 … 0.35 m |
| RR21_M | 0 … 0.65 m |
| ZRAE02B01 | 0 … 0.9 m |
| ZRME01B01 | 0 … 0.25 m |
| ZRME03B01 | 0 … 1.1 m |
| ZRMR02K01 | 0 … 0.3 m |
| ZRMS02_01 | 0 … 0.5 m |
| RF505 | 0 … 0.4 m |
| RF508 | 0 … 0.4 m |
| RF258 | 0 … 0.4 m |
| ZRAF07K01 | 0 … 0.4 m |
| ZRAF08K01 | 0 … 0.4 m |
| ZRDF03K01 | 0 … 1.3 m |
| ZRDF10K01 | 0 … 1.4 m |
Complementary Products
|
