Wenglor | OUM502C0002

OUM502C0002 Fiber-optic amplifier

Fiber-Optic Amplifier

In Stock
$342.00 per unit

Applications: Sensors & I/O

Description

These sensors are equipped for use with glass fiber optic cables but can be used with or without one. The transmitter and receiver are located in a single housing. The sensor evaluates transmitted light reflected back from the object and the output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances. This product has been discontinued, but is still available as a spare part. Successor

Features at a Glance

  • IO-Link interface
  • Teach-in, external teach-in
  • Compact housing

Technical Data

Optical Data

Range 500 mm
Switching Hysteresis  < 10 %
Light Source Infrared Light
Wavelength 875 nm
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Opening Angle 12 °

Electrical Data

Supply Voltage 18 … 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 2.5 kHz
Response Time 200 µs
On-/Off-Delay 0 … 60 s
Temperature Drift < 10 %
Temperature Range -25 … 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Teach Mode NT, MT
Interface IO-Link V1.0
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, PBT
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4-pin
Weight 66 g

General Data

Scope of delivery 1 × BEF-SET-02 mounting set
1 × BEF-SET-08 mounting set
1 × initial start-up instructions
1 × sensor

Output

External teach-in input yes
IO-Link yes
PNP NO yes

Adjustable parameters

Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay

Standards and certificates

Connection Diagram

Ctrl. Panel

30 = Switching Status/Contamination Warning
06 = Teach Button

Complementary Products

  • Glass Fiber-Optic Cable
  • IO-Link Master
  • PNP-NPN Converter BG2V1P-N-2M
  • Software

Documentation

CAD data

Datasheets

Declarations of Conformity / Approvals

ECAD data

Initial start-up instructions

Interface protocol

Operating instructions