OTDK502A0002 Reflex Sensor Energetic
Reflex Sensor
In Stock
$84.00
per unit
Applications: Sensors & I/O
Description
The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.
Features at a Glance
- Clever inclusive mounting technology
- Simple installation
- Adjustable detection range
- Large detection range
- IO-Link 1.1
- Minimal installation space
Technical Data
Optical Data
| Range | 500 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Infrared Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Light Spot Diameter | see Table 1 |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 500 Hz |
| Response Time | 1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 … 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/GF |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 8 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 2,988.01 a |
General Data
| Scope of delivery | 1 × Z0008 mounting console 1 × initial start-up instructions 1 × MUTTER-M18-E012 hex nut 1 × sensor |
| Packaging unit | 1 Piece |
Output
| IO-Link | yes |
| PNP NC, PNP NO | yes |
Adjustable parameters
| Output | Push-pull NPN PNP |
| Circuit | NC NC+NO NO |
| Other parameters | Off-delay On-delay Mode of operation Error output Switching hysteresis Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates
      |
Table 1
| Detection Range | 100 mm | 300 mm | 500 mm |
| Light Spot Diameter | 11 mm | 26 mm | 41 mm |
Connection Diagram
 |
Ctrl. Panel
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning 68 = Power LED |
Complementary Products
|
