Description

These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. High-precision background suppression makes it possible to reliably detect even black objects at up to 900 mm. The scaled switching-distance adjuster assures quick and simple adjustment to the desired distance. Thanks to the innovative fast-clip mounting system and quick wiring, the sensor are installed and ready for use in no time flat. This product has been discontinued, but is still available as a spare part. Successor

Features at a Glance

Scaled switching distance adjuster
Energy savings thanks to EcoMode
Optimized performance
Quick wiring
Time-saving installation with fast-clip mounting system

Technical Data

Optical Data

Range	900 mm
Switching Hysteresis	< 5 %
Light Source	Infrared Light
Wavelength	860 nm
Service Life (T = +25 °C)	100,000 h
Risk Group (EN 62471)	1
Max. Ambient Light	90,000 Lux
Opening Angle	3 °

Electrical Data

Supply Voltage	20.6 … 30 V DC
Current Consumption Sensor (Ub = 24 V)	< 16 mA
EcoMode	yes
Switching Frequency	100 Hz
Response Time	5 ms
Temperature Drift	< 5 %
Temperature Range	-40 … 60 °C
Number of Switching Outputs	1
Switching Output Voltage Drop	< 0.9 V
PNP Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Logic	yes
Single Discharge	yes
Block Forwarding	yes
Solenoid Valve	yes
Protection Class	III

Mechanical Data

Setting Method	Potentiometer
Housing Material	Plastic, ABS/GF
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Cable length (L)	1.5 m
Weight	263 g

General Data

Scope of delivery

1 × cover cap for M12 screw connector
1 × operating instructions
1 × Z0034 molded seal
1 × VENTIL-K25 solenoid valve
1 × O-ring ø 2.7 mm × 0.65 mm
1 × M2.5 screw × 22 mm
1 × sensor

Pneumatic Solenoid Valve Unit

Valve no.	K25
Supply Voltage Valve	19.2 … 28.8 V
Current Consumption Valve	86 mA
Valve temperature range	-15 … 50 °C
Operating Pressure	0 … 4 bar
Nominal Width	1.2 mm
Nominal flow rate 1 -> 2	50 NL/min
Supply-Line Connector Pipe	2× 8×1
Working-Line Connector Pipe	4×1
Valve function	3/2-Way
Switching function	NC