OPT106 Fiber-optic amplifier Continuous Light Sensor
Fiber-Optic Amplifier
In Stock
$1,197.69
per unit
Applications: Sensors & I/O
Description
wenglor’s continuous light sensor detects whether light is emitted from a light source (flame, LED, lamp). This means that LEDs, for example, can be monitored.
Features at a Glance
- Sensitivity adjustable
- Adaptable for glass fiber-optic cable
- Contamination warning
Technical Data
Optical Data
| Minimum quantity of light | 10 Lux |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 300 Hz |
| Response Time | 1,660 µs |
| Temperature Drift | < 10 % |
| Temperature Range | -10 … 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Brass, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | Cable; 3-wire |
| Cable length (L) | 2 m |
| Wire cross-section | 0.5 mm² |
| Weight | 174 g |
General Data
| Scope of delivery | 1 × BEF-SET-10 mounting set 1 × sensor |
Output
| PNP NO | yes |
Standards and certificates
     |
Connection Diagram
 |
Complementary Products
|
