OPT1004 Retro-Reflex Sensor for Transparent Objects
Retro-Reflex Sensor
In Stock
$234.00
per unit
Applications: Sensors & I/O
Description
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Features at a Glance
- Simple installation
- Red light
Technical Data
Optical Data
| Range | 1,200 mm |
| Reference Reflector/Reflector Foil | RR34SM |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 2 kHz |
| Response Time | 250 µs |
| Temperature Drift | < 5 % |
| Temperature Range | -10 … 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Protection Class | III |
Mechanical Data
| Housing Material | Plastic, PBT Stainless steel, V2A (1.4305 / 303) |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 28 g |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × MUTTER-M18-E012 hex nut 1 × sensor |
Output
| PNP NC | yes |
Additional product information
| External Information | Teach input deactivated , Normal mode preset, Flashing mode 3 |
Standards and certificates
     |
Connection Diagram
 |
Ctrl. Panel
|
30 = Switching Status/Contamination Warning
|
Complementary Products
|
