OCP662X0135 Laser Distance Sensor Triangulation
Laser Distance Sensor
In Stock
$814.00
per unit
Applications: Sensors & I/O
Description
These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.
Features at a Glance
- CMOS line array
- Highly accurate switching distance
- Minimal switching hysteresis
- Switching point independent of material, color and brightness
Technical Data
Optical Data
| Range | 660 mm |
| Setting Range | 60 … 660 mm |
| Switching Hysteresis | < 1 % |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 100 Hz |
| Response Time | < 5 ms |
| On-/Off-Delay (RS-232) | 0 … 1 s |
| Temperature Drift | < 50 µm/K |
| Temperature Range | -25 … 60 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 1.5 V |
| Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Teach Mode | HT, VT, FT, TP |
| Transmission rate | 9,600 Bd |
| Protection Class | III |
| FDA Accession Number | 1120728-000 |
Mechanical Data
| Setting Method | Teach-In |
| Housing Material | Plastic, ABS Plastic, PC |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 43 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 918.59 a |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × sensor |
Output
| Error Output | yes |
| PNP NO | yes |
| RS-232 with Adapterbox | yes |
| External teach-in input | yes |
Adjustable parameters
| Output | Error Output Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| Other parameters | Exposure time Laser light Switching hysteresis Teach-in mode Off-delay On-delay |
| All other parameters can be found in the product documentation. |
Standards and certificates
      |
Table 1
| Detection Range | 60 mm | 660 mm |
| Spot Size | 0,5 x 1,2 mm | 2 x 5,5 mm |
Connection Diagram
 |
Ctrl. Panel
|
07 = Selector Switch
24 = Plus Button 25 = Minus Button 03 = Error Indicator 01 = Switching Status Indicator |
Complementary Products
|
