I1QH006 Inductive Sensor with IO-Link
Inductive Sensor
In Stock
$120.00
per unit
Applications: Sensors & I/O
Description
The Inductive Sensors have not only been equipped with ASIC, but rather with an IO-Link interface as well for ideal integration into networks. As a result, a total of three switching distances and two switching frequencies can be selected, and PNP/NPN as well as NO/NC/antivalent options can be set as desired. This reduces the number of variants while simultaneously expanding the scope of functions.
Features at a Glance
- Easy sensor configuration using the IO-Link interface
- Minimal mounting clearance thanks to wenglor weproTec
- Innovative ASIC circuit technology
- Integrated error display and error output
- Adjustable switching distance
Technical Data
Inductive Data
| Switching Distance | 40 mm |
| Standard Target | 120 × 120 mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 0,75/0,32/0,33 |
| Mounting | Non-flush |
| Mounting A/B/C/D in mm | 90/110/120/40 |
| Mounting B1 in mm | 0…60 |
| Switching Hysteresis | < 10 % |
Electrical Data
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 400 Hz |
| Temperature Drift | < 10 % |
| Temperature Range | -40 … 80 °C |
| Switching Output Voltage Drop | < 1 V |
| Switching Output/Switching Current | 150 mA |
| Residual Current Switching Output | < 100 µA |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Housing Material | Plastic, ABS |
| Sensing face | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 116 g |
Safety-relevant Data
| MTTFd (EN ISO 13849-1) | 3,706.54 a |
General Data
| Packaging unit | 1 Piece |
Function
| Error Indicator | yes |
| Programmable switching distance | 30/35/40 mm |
| Programmable switching frequency | yes |
Output
| IO-Link | yes |
| Error Output | yes |
| PNP NO | yes |
Adjustable parameters
| Output | Error Output Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates
      |
Connection Diagram
 |
Complementary Products
|
Documentation
CAD data
Datasheets
Declarations of Conformity / Approvals
Initial start-up instructions
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_Inductive_V1.1_EN.pdf
1 file(s) 971.01 KBInterface_Protocol_IO-Link_Parameter_Process_Data_Inductive_V1.0.1_EN.pdf
1 file(s) 958.38 KB
Operating instructions
Product certificates
I08H025_I08H026_I12H019_I12H020_I18H013_I18H014_I30H013_I30H014_I1QH005_I1QH006_IO-Link_V1.1_Manufacturer_declaration_EN.pdf
1 file(s) 408.63 KB
