Description
This pressure sensor is used for absolute pressure measurement of liquids and gases. Its front-flush process connection made of high-quality stainless steel prevents the adhesion of viscous media and enables reliable pressure measurement.
Features at a Glance
- FDA compliant
- Robust stainless steel housing with IP69K
Technical Data
Sensor-specific data
| Measuring Range | 0 … 10 bar |
| Measurement Type | absolute |
| Maximum overload pressure | 42 bar |
| Bursting pressure | 60 bar |
| Medium | Liquids, gases |
| Pressure response time (t90) | < 1 ms |
| Measuring error (total) | + 0.3 % |
| Hysteresis | < ± 0.01 % |
| Linearity Deviation | < ± 0.1 % |
| Zero-point error | < ± 0.1 % |
| Repeat Accuracy | < ± 0.01 % |
| Temperature coefficient zero-point | <± 0,01% /10K |
| Temperature coefficient range | <± 0,06% /10K |
| Reproducibility | < ± 0.05 % |
Environmental conditions
| Temperature of medium | -20 … 125 °C |
| Ambient temperature | -10 … 85 °C |
| Storage temperature | -25 … 85 °C |
| EMC | DIN EN 61326-1 |
| Shock resistance per DIN IEC 68-2-27 | 30 g / 11 ms |
| Vibration resistance per DIN IEC 60068-2-6 | 10 g (10…2000 Hz) |
Electrical Data
| Supply Voltage | 12 … 32 V DC |
| Current Consumption (Ub = 24 V) | < 21 mA |
| Response Time | 1 ms |
| Analog Output | 4…20 mA |
| Signal source | Pressure |
| Current Output Load Resistance | < 500 Ohm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data
| Sensor element | Stainless steel membrane |
| Housing Material | Stainless steel, V4A (1.4404/316L) |
| Material in contact with media | Stainless steel, V4A (1.4435/316L) |
| Degree of Protection | IP68 * IP69K * |
| Connection | M12 × 1; 4-pin |
| Process Connection | 19 mm dia., flush mounted |
| Weight | 39 g |
General Data
| Scope of delivery | 1 × initial start-up instructions 1 × sensor |
Output
| Analog Output | yes |
Standards and certificates
    |
Connection Diagram
 |
Complementary Products
|
