Wenglor | CP70QXVT35S847

CP70QXVT35S847 Laser Distance Sensor Triangulation

Laser Distance Sensor

In Stock
$770.00 per unit

Applications: Sensors & I/O

Description

These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color, and brightness. Sensor functions can be activated and values can be output via the RS-232 interface.

Features at a Glance

  • Highly accurate switching distance
  • Minimal switching hysteresis
  • Switching point independent of material, color and brightness
  • Modification of standard product, view information document

Technical Data

Optical Data

Range 660 mm
Setting Range 60 … 660 mm *
Switching Hysteresis 1 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 2
Max. Ambient Light 10,000 Lux

Electrical Data

Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 20 Hz
Response Time 10 ms
On-/Off-Delay 10 ms
Temperature Drift < 50 µm/K
Temperature Range -25 … 60 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode FT**
Interface RS-232
Transmission rate 38,400 Bd
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, ABS
Plastic, PC
Degree of Protection IP67
Connection M12 × 1; 5-pin
Optic Cover Plastic, PMMA
Weight 83 g

General Data

Scope of delivery 1 × initial start-up instructions
1 × laser warning sign
1 × sensor
External Information ON time delay preset to 20 ms, OFF time delay preset to 20 ms, Preset switching distance 450 mm, Window spacing preset to ± 30 mm, Modified control panel, Modified circuit diagram.

Output

Error Output yes
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
RS-232 Interface yes

Adjustable parameters

Output Error Output
Push-pull
NPN
PNP
Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay
All other parameters can be found in the product documentation.

Standards and certificates

Table 1

Detection Range 60 mm 660 mm
Spot Size 0,6 × 2,5 mm 3 × 8 mm

Connection Diagram

Ctrl. Panel

01 = Switching Status Indicator
03 = Error Indicator
24 = Plus Button
25 = Minus Button

Complementary Products

  • Interface Cable S232W3
  • Fieldbus Gateway ZAGxxxN01, EPGG001

Documentation

CAD data

Datasheets

Declarations of Conformity / Approvals

General instructions

Initial start-up instructions

Operating instructions