Description
The test rod is an opaque cylinder used after the installation of a safety light curtain to verify that no beams are bypassed due to the presence of reflecting surfaces
The test is carried out by slowly moving the test rod (Ø = Resolution) in the centre and then along each side of the protected area. During this procedure the Green led on the Receiver must always remain in the off state
Technical Data
Features
| Packaging dimensions HxLxW (mm) | 235 x 110 x 110 |
| Product class | B |
| Custom tariff | 7608208990 |
Mechanical data
| Diameter (mm) | 50 |
